UHB 15N2

£14.50£18.60

UHB 15N2

This product is sold in widths of 30mm, 40mm and 50mm, thickness 3.50mm and cut lengths of 1000mm selected below. Please specify the number of lengths you require in the quantity box.

Clear
SKU: UHBB-BS-UHB-15N2 Category:

Description

UHB 15N2

Uddeholm UHB 15N2 Nickel steel

Bandsaw steel by design. Very tough, similar to AISI L6 tool steel, except for the missing Chrome. 15N20 is used either as a blade material on its own, or mixed with other steel in pattern welded damascus. E.g. 15N20/AISI 1095 steel or 15N20/AISI 1084 steel are quite popular. Nickel in 15N20 provided good contrast. Easy to sharpen, takes fine edge, but not so much in the edge holding department, toughness is its main benefit. Although, western custom knife makers use it in kitchen knives at higher hardness. Also used to make swords.

C   Si   Mn   P max   S max   Cr   Ni 
0,75% 0,30% 0,40% 0,018% 0,005% 0,11% 2,00%

Heat treatment and Specifics

 

This product is sold in widths of 30mm, 40mm and 50mm, thickness 3.50mm and cut lengths of 1000mm

Additional information

SIZE

35mm x 3.50mm x 1000mm, 40mm x 3.50mm x 1000mm, 50mm x 3.50mm x 1000mm